As the name suggests, solar street lights use solar energy to convert electricity into power for LED beads. Solar street lights are usually installed on the roadside and exposed to wind and sun all year round. Over time, they can cause some minor problems, such as excessive dust on the solar panel leading to a decrease in photoelectric conversion efficiency and insufficient charging. Therefore, after installing solar street lights, we also need to regularly inspect them, especially some core components: solar panels, batteries, LED light beads. How do we check the solar street lights on weekdays to ensure they can be used normally?
Below, the editor will lead everyone to perform simple daily maintenance on solar street lights.
1. Regularly check whether the solar panels are damaged, replace them in a timely manner, clean the dust on the panels to ensure they can work properly, and avoid solar street lights from not shining properly at night due to insufficient charging.
2. Check whether the connection wires and bottom lines of the solar panel are in good contact and free of damage, to avoid the electricity generated by the solar panel from not being stored in the battery in a timely manner. Also, check the installation brackets of the solar cell to avoid being blown off by the wind.
3. Check the surface of the battery panel for bird droppings and fallen leaves, and clean them up promptly if found.
In addition to cleaning and maintaining the solar panels, it is also necessary to maintain the batteries to prevent the solar street lights from malfunctioning.
1. When encountering severe weather conditions such as strong winds, hail, and heavy rain, protective measures should be taken for solar panels and batteries to avoid damage caused by natural causes.
2. The battery of solar street lights should be kept clean and dry regularly. If dust or rain is found, it should be rinsed with clean water first, and then gently wiped clean with a dry towel. Repair the damaged areas. Do not use hard objects for cleaning to avoid scratching the surface protective film of the battery.
3. Inspect and maintain the entire circuit of solar street lights to avoid loose wiring and interfaces.